Tektronix Indonesia-Call 081297888837 , 0816888602 , 0818723986
New Products

Rabu, 15 Mei 2013

InfiniiVision 3000 X-Series DSO/MSO Oscilloscopes

Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
  • 100 MHz to 1 GHz
  • DSO or MSO (16 digital channels)
  • 1,000,000 waveforms/sec update rate
  • 2 Mpts memory standard (4 Mpts optional)
  • Built-in 20 MHz function/arbitrary waveform generator (optional)
  • Integrated digital voltmeter (optional)
  • Standard 3-year warranty, like all Agilent instruments
Add to Cart View detail

InfiniiVision 4000 X-Series DSO/MSO Oscilloscopes

InfiniiVision 4000 X-Series DSO and MSO Oscilloscopes The oscilloscope experience redefined
Experience the speed:
  • Industry’s fastest 1,000,000 waveforms/sec update rate
  • MegaZoom IV uncompromised smart memory technology
  • Standard segmented memory
Experience the usability:
  • Industry-exclusive capacitive touch screen technology and interface designed for touch
  • Industry’s largest 12.1-inch display
  • Innovative InfiniiScan Zone touch triggering
Experience the integration:
  • Get 5 instruments in 1: oscilloscope, logic analyzer (MSO), serial protocol analyzer (including USB), dual-channel WaveGen, and 3-digit voltmeter
  • Full upgradability, including bandwidth
Add to Cart View detail

Kamis, 04 April 2013

Boonton Indonesia ,Modulation Analyzers


8201 Modulation Analyzer

The Model 8201 provides precision modulation and audio analysis in a single, easy-to-operate package. Measures AM, FM, PM, carrier and audio frequencies, SINAD, distortion and carrier level.

Quick Specifications

RF Input
Frequency Range 100 kHz to 2.5 GHz
Maximum Input 1 watt (7 V RMS, +30 dBm)
Input Impedance    50 Ω nominal, SWR <1.5
Audio Distortion/SINAD
Distortion Range 0.01 % to 100% THD or 0 to 80 dB SINAD
Distortion Accuracy ± 10% of reading or ± 1 dB SINAD.
(The residual AM/FM or ØM must be accounted
for in distortion measurements)
Frequency Range 20 Hz to 20 kHz. Automatic operation when modulation frequency is within this range
Residual Noise & Distortion Less than 0.1 % (60 dB SINAD) distortion
FM Modulation
Measurement: + peak, -peak, peak average, quasi-peak and RMS
Carrier Range 0.2 MHz to 0.5 MHz 0.5 MHz to 10 MHz 10 MHz to 2.5 GHz
Deviation Range 0 to C.F./10 kHz 0 to 150 kHz 0 to 500 kHz
Deviation Accuracy
@ spec. mod. rates
1% of reading
30 Hz to 5 kHz
2% of reading
5 kHz to 7.5 kHz
1% of reading
30 Hz to 15 kHz
2% of reading
15 kHz to 30 kHz
1% of reading
30 Hz to 100 kHz
2% of reading
100 kHz to 150 kHz
Frequency Range
20 Hz to 15 kHz 20 Hz to 50 kHz 20 Hz to 220 kHz
AF Output Distortion <0.1% @ <30 kHz dev <0.1% at <75 kHz <0.1% at <100 kHz dev
AM Modulation
Measurement: + peak, - peak, peak average, quasi-peak, and RMS
Carrier Range 0.1 MHz to 0.5 MHz 0.5 MHz to 10 MHz 10 MHz to 2.5 GHz
Depth Range 0 to 99% 0 to 99% 0 to 99%
Depth Accuracy
@ spec. mod. rates
1% of reading
30 Hz to 5 kHz
1% of reading
30 Hz to 15 kHz
1% of reading
30 Hz to 100 kHz
Frequency Range
20 Hz to 15 kHz 20 Hz to 50 kHz 20 Hz to 220 kHz
AF Output Distortion <0.3% for 90% AM <0.3% for 90% AM <0.3% for 90% AM
Residual AM <0.05% RMS for input levels >100 mV, 15 kHz low-pass filter; >0.02% RMS for input levels >100 mV, 3 kHz low-pass filter; carrier frequency <520 MHz. Above 520 MHz, residuals increase linearly with frequency
Add to Cart View detail

RF Volt Meters - Wireless Telecom Group


9240 RF Voltmeter

The 9240 series is the latest addition to Boonton’s popular 9200 series of RF voltmeters. It combines accuracy, smart probes, and operator features that have never before been available in its price range. It is simple to use on the bench, and comprehensive enough to integrate into an ATE system. Boonton’s proven voltage probes directly measure from 200 μV to 10 V with usable indication as low as 50 μV and have true RMS response below 30 mV.

Quick Specifications

Voltage Range 200 μV to 10 V in eight ranges
(300 V to 700 MHz with a 100:1 divider)
 Indications to 50 μV
Voltage Display 1 mV to 300 V fs
Frequency Range 10 kHz to 1.2 GHz with 952001A probes
10 Hz to 100 MHz with Model 952016 probe
Waveform Response RMS to 30 mV calibrated in the RMS of a sine wave above 30 mV (RMS to 3V and 700 MHz with 100:1 divider)
Input Capacitance       Less than 1.5 pF
Recorder Output 10 V fs proportional to indicated voltage in mV mode over a range 7V = 0dBm regardless of Z. in dB mode,
sensitivity of 1V per 10dB change over entire range
Add to Cart View detail

RF Power Sensors - Wireless Telecom Group


RF Power Sensors

The New 55 Series Wideband USB Power Sensor

Boonton once again sets the standard for fast RF power measurements with the introduction of its 55 Series Wideband USB power sensors. Built with Boonton’s Real-Time Power Processing™ technology, this new product line offers speed and accuracy never before seen in a USB form factor.

Wideband Peak Power Sensors

Boonton has a complete line of peak power sensors up to 40 GHz for all of your fast rise time, wide bandwidth and wide dynamic range applications

52000 Series USB CW Power Sensor

The 52000 series power sensors are complete miniature RF & Microwave power meters. They contain a CPU which controls the sensor, processes the measurement results and operates the interface. All measurement data and settings can be transmitted via a USB interface to and from a PC.

Average & CW Power Sensors

For all your CW and continuously modulated signals, Boonton offers CW and average power sensors up to 40 GHz. Our sensors have wide dynamic range and high power measurement capabilities.
Add to Cart View detail

Rabu, 16 Januari 2013

Tektronix MSO/DPO3000 Mixed Signal Oscilloscope


MSO/DPO3000 Mixed Signal Oscilloscope

Feature-rich tools for debugging mixed signal designs.

With up to 500 MHz bandwidth and 2.5 GS/s sample rate, the MSO/DPO3000 Mixed Signal Oscilloscope Series provides the performance you need for many of today's mainstream applications. With as many as 20 channels, you can analyze analog and digital signals with a single instrument. Combine that with automated serial and parallel bus analysis, innovative Wave Inspector® controls, and automated power measurements, and the MSO/DPO3000 Series provides the feature-rich tools you need to simplify and speed debug of your complex design.
Add to Cart View detail
Support : Creating Website | Johny Template | Mas Template
Copyright © 2012. Tektronix Indonesia - All Rights Reserved
Template Created by Creating Website Published by Mas Template
Proudly powered by Blogger