Tektronix Products

Video

Tektronix Oscilloscopes

Tektronix Spectrum Analyzers

Bit Error Rate Testers

Arbitrary Waveform Generator

Digital Multimeters

Gallery

Agen/Distributor Resmi Boonton Indonesia

Boonton Indonesia ,Modulation Analyzers

By: Anonymous on 12.07 / comment : 0 , , ,

$00.00

8201 Modulation Analyzer

The Model 8201 provides precision modulation and audio analysis in a single, easy-to-operate package. Measures AM, FM, PM, carrier and audio frequencies, SINAD, distortion and carrier level.

Quick Specifications


RF Input
Frequency Range 100 kHz to 2.5 GHz
Maximum Input 1 watt (7 V RMS, +30 dBm)
Input Impedance    50 Ω nominal, SWR <1.5
Audio Distortion/SINAD
Distortion Range 0.01 % to 100% THD or 0 to 80 dB SINAD
Distortion Accuracy ± 10% of reading or ± 1 dB SINAD.
(The residual AM/FM or ØM must be accounted
for in distortion measurements)
Frequency Range 20 Hz to 20 kHz. Automatic operation when modulation frequency is within this range
Residual Noise & Distortion Less than 0.1 % (60 dB SINAD) distortion
FM Modulation
Measurement: + peak, -peak, peak average, quasi-peak and RMS
Carrier Range 0.2 MHz to 0.5 MHz 0.5 MHz to 10 MHz 10 MHz to 2.5 GHz
Deviation Range 0 to C.F./10 kHz 0 to 150 kHz 0 to 500 kHz
Deviation Accuracy
@ spec. mod. rates		 1% of reading
30 Hz to 5 kHz
2% of reading
5 kHz to 7.5 kHz		 1% of reading
30 Hz to 15 kHz
2% of reading
15 kHz to 30 kHz		 1% of reading
30 Hz to 100 kHz
2% of reading
100 kHz to 150 kHz
Modulation
Frequency Range		 20 Hz to 15 kHz 20 Hz to 50 kHz 20 Hz to 220 kHz
AF Output Distortion <0.1% @ <30 kHz dev <0.1% at <75 kHz <0.1% at <100 kHz dev
AM Modulation
Measurement: + peak, - peak, peak average, quasi-peak, and RMS
Carrier Range 0.1 MHz to 0.5 MHz 0.5 MHz to 10 MHz 10 MHz to 2.5 GHz
Depth Range 0 to 99% 0 to 99% 0 to 99%
Depth Accuracy
@ spec. mod. rates		 1% of reading
30 Hz to 5 kHz		 1% of reading
30 Hz to 15 kHz		 1% of reading
30 Hz to 100 kHz
Modulation
Frequency Range		 20 Hz to 15 kHz 20 Hz to 50 kHz 20 Hz to 220 kHz
AF Output Distortion <0.3% for 90% AM <0.3% for 90% AM <0.3% for 90% AM
Residual AM <0.05% RMS for input levels >100 mV, 15 kHz low-pass filter; >0.02% RMS for input levels >100 mV, 3 kHz low-pass filter; carrier frequency <520 MHz. Above 520 MHz, residuals increase linearly with frequency

RF Volt Meters - Wireless Telecom Group

By: Anonymous on 12.02 / comment : 0 , , ,
















9240 RF Voltmeter

The 9240 series is the latest addition to Boonton’s popular 9200 series of RF voltmeters. It combines accuracy, smart probes, and operator features that have never before been available in its price range. It is simple to use on the bench, and comprehensive enough to integrate into an ATE system. Boonton’s proven voltage probes directly measure from 200 μV to 10 V with usable indication as low as 50 μV and have true RMS response below 30 mV.

Quick Specifications


Voltage Range 200 μV to 10 V in eight ranges
(300 V to 700 MHz with a 100:1 divider)
 Indications to 50 μV
Voltage Display 1 mV to 300 V fs
Frequency Range 10 kHz to 1.2 GHz with 952001A probes
10 Hz to 100 MHz with Model 952016 probe
Waveform Response RMS to 30 mV calibrated in the RMS of a sine wave above 30 mV (RMS to 3V and 700 MHz with 100:1 divider)
Input Capacitance       Less than 1.5 pF
Recorder Output 10 V fs proportional to indicated voltage in mV mode over a range 7V = 0dBm regardless of Z. in dB mode,
sensitivity of 1V per 10dB change over entire range

RF Power Sensors - Wireless Telecom Group

By: Anonymous on 11.59 / comment : 1 , , ,

RF Power Sensors

The New 55 Series Wideband USB Power Sensor

Boonton once again sets the standard for fast RF power measurements with the introduction of its 55 Series Wideband USB power sensors. Built with Boonton’s Real-Time Power Processing™ technology, this new product line offers speed and accuracy never before seen in a USB form factor.

Wideband Peak Power Sensors

Boonton has a complete line of peak power sensors up to 40 GHz for all of your fast rise time, wide bandwidth and wide dynamic range applications

52000 Series USB CW Power Sensor

The 52000 series power sensors are complete miniature RF & Microwave power meters. They contain a CPU which controls the sensor, processes the measurement results and operates the interface. All measurement data and settings can be transmitted via a USB interface to and from a PC.

Average & CW Power Sensors

For all your CW and continuously modulated signals, Boonton offers CW and average power sensors up to 40 GHz. Our sensors have wide dynamic range and high power measurement capabilities.
Langganan: Postingan (Atom)
Created By SoraTemplates | Distributed By Blogger